Copper Repipe in Denver, CO
Copper has been the premium supply material for generations. It is rigid, it handles heat, and it has a long track record. It also costs more, takes longer, and needs a wall opening at nearly every joint, which matters in a finished house.
- Type L copper with soldered or press connections
- Preferred where exposed pipe has to look right
- Permitted, pressure tested, and inspected
Get A Free Quote
We reply fast. Same day when possible.
What it is
Copper repipe A copper repipe is the replacement of a home's water supply lines with new Type L copper pipe, joined by soldered or press fittings.
A Denver homeowner should care because copper is a durable, long-lasting supply material, though it costs more and requires more wall access to install than PEX.
Copper is excellent pipe with a real installation cost
In new construction or an open remodel, copper is straightforward. In a finished 1940s bungalow it means opening walls at every drop and turn. That is the honest tradeoff, and it is why most whole-house repipes in occupied Denver homes end up in PEX while copper wins in exposed mechanical rooms and premium remodels.
- Rigid, durable, and unaffected by sunlight
- Handles high temperature without support concerns
- Looks finished where pipe is exposed
- Long, proven service history in the metro
Copper makes sense when
- Walls are already open for a remodel or addition
- You want exposed pipe in a mechanical room or loft to look clean
- Local preference or an HOA specification calls for copper
- You are replacing a short run rather than the whole house
- You want to match existing copper distribution
What a copper repipe includes
- Type L copper sized by fixture unit count and run length
- Soldered or press-fit joints, both code accepted
- Dielectric separation where copper meets dissimilar metal
- Proper support and isolation to control expansion noise
- New shutoffs and supply lines at every fixture
- Permit, pressure test, inspection, and patching
What to expect and how the work gets done
- 1
Scope and access
Map every joint location, because each one needs to be reachable.
- 2
Rough in
Cut, fit, and join the new distribution runs.
- 3
Pressure test
Hold pressure and check every joint before closing.
- 4
Inspect and finish
Pass inspection, then patch and paint the openings.
Copper is not the only option for a repipe. The full PEX versus copper versus CPVC table is on our pipe material comparison guide.
Compare PEX, copper, and CPVCCredentials, reviews, and company proof
- Colorado Master PlumberRepipe work is permitted and inspected, with the whole system signed off, not patched section by section.
- Plumbing Contractor license 2110Licensed to pull permits on supply, drain, and service line replacement.
- Serving Denver since 2006Two decades opening walls in prewar bungalows, postwar ranches, and 1980s builds across the metro.
Ready when you are
Tell us what is happening and your Denver neighborhood. We will route it fast.
Copper repipe cost factors
Copper is a commodity, so material price moves. Labor and drywall repair move more.
Need help right now? 24/7 emergency plumbing service. Planning a larger repair? See financing options.
- Copper commodity pricing at the time of quote
- Joint count, since every joint needs access
- Soldered versus press connections
- Wall and ceiling repair across the whole route
- Whether the work happens during an open remodel
- Permit and inspection fees
Frequently asked questions
Licenses, credentials, and company proof
- Colorado Master PlumberLicense MP-18927
- Colorado State Plumbing ContractorLicense 2110
- Family Owned & OperatedServing Denver since 2006, 20 years
- Better Business BureauAccredited Business, A+ rating
- Angie's List Super Service Award2012 through 2017
- Serving Denver since 2006Residential and commercial properties across the metro
More plumbing help from Afford-A-Rooter
- Cast Iron Drain Stack ReplacementRecurring backups in an older Denver home? We camera the stack first, then replace failed cast iron drains. Free assessment. Call (720) 296-7972.View page
- Polybutylene ReplacementGray polybutylene pipe in a 1978 to 1995 home fails without warning. We replace it with PEX and document the work. Call (720) 296-7972.View page
- Lead Service Line ReplacementNot sure if your service line is lead? We identify the material, explain the Denver Water program, and replace customer-side pipe. Call (720) 296-7972.View page
- Plumbing Cost GuideWhat drives plumbing cost in Denver: drain cleaning, sewer lines, water heaters, repipes, and more. Honest quotes, no guesswork. Call (720) 296-7972.View page
- Whole House Repipe CostWhat actually drives whole house repipe cost in Denver: fixture count, access, wall finish, and material. Free in-home assessment. Call (720) 296-7972.View page
- Partial Repipe OptionsBudget will not cover a full repipe? We phase the work by failure order and put the plan in writing. Free assessment. Call (720) 296-7972.View page