Toilet Installation and Replacement in Denver, CO
New toilet, same drain. The job is quick when the flange is solid and slow when it is not. Rocking, seeping at the base, or a wax ring that keeps failing usually means the flange needs attention before any new toilet goes on it.
- Standard, comfort height, and one-piece toilets installed
- Flange condition checked and repaired, not shimmed over
- Old toilet hauled away
Get A Free Quote
We reply fast. Same day when possible.
What it is
Toilet installation Toilet installation is the process of removing an old toilet and setting a new one, including a new wax or foam ring seal, a securely anchored base, and a properly connected water supply line.
A toilet that rocks or was not sealed correctly can leak at the base without anyone noticing, and in Denver's older homes uneven flooring around the toilet flange makes a solid installation even more important.
The flange decides whether the install lasts
A toilet seals against the closet flange with a wax or waxless ring. If the flange sits below finished floor level, is cracked, or has pulled its bolts out of the subfloor, the new toilet will seep no matter how good it is. That gets fixed first.
- Correct rough-in measured, usually 12 inches, sometimes 10 or 14
- Flange repaired or replaced when needed
- New supply line and shutoff, not the old crimped one
- Level set and caulked so it does not rock
Replace the toilet when
- It rocks, or the floor around it is soft
- There is a crack in the tank or bowl
- It needs two flushes to clear
- You have rebuilt the internals more than once
- You want comfort height or a modern low-flow model
What the install includes
- Rough-in measurement from wall to bolt centers before ordering
- Old toilet removed, wax residue cleaned, flange inspected
- Flange repair, extender, or replacement where the height is wrong
- New wax or waxless seal, new closet bolts, new supply line
- New angle stop if the old shutoff will not seal
- Level, secure, caulked, and flush tested
What to expect and how the work gets done
- 1
Measure
Rough-in distance and space, so the new bowl actually fits the room.
- 2
Remove
Water off, tank drained, old unit out, area cleaned.
- 3
Prep the flange
Repair or replace so the seal sits at the right height on solid material.
- 4
Set and test
New seal, level set, bolts snugged, supply connected, multiple flush tests.
Credentials, reviews, and company proof
- Colorado Master PlumberFixture and appliance work is permitted and code-compliant, not handyman work.
- Plumbing Contractor license 2110Licensed to pull permits and pass inspection on gas, water, and drain work.
- Serving Denver since 2006Two decades of Front Range water chemistry, altitude, and inspection practice.
Ready when you are
Tell us what is happening and your Denver neighborhood. We will route it fast.
What changes toilet install cost
A straight swap onto a healthy flange is the base case. Floor and flange damage add the most.
Need help right now? 24/7 emergency plumbing service. Planning a larger repair? See financing options.
- Toilet type: two-piece, one-piece, wall-hung, or smart bidet seat
- Flange repair, extension, or full replacement
- Subfloor repair when there has been a long slow leak
- Replacing a seized angle stop or supply line
- Nonstandard rough-in requiring a specific model
- Removal and disposal of the old fixture
Frequently asked questions
Licenses, credentials, and company proof
- Colorado Master PlumberLicense MP-18927
- Colorado State Plumbing ContractorLicense 2110
- Family Owned & OperatedServing Denver since 2006, 20 years
- Better Business BureauAccredited Business, A+ rating
- Angie's List Super Service Award2012 through 2017
- Serving Denver since 2006Residential and commercial properties across the metro
More plumbing help from Afford-A-Rooter
- Faucet ReplacementDripping or corroded faucet in Denver? We replace kitchen and bath faucets, plus the shutoff valves that never close. Call (720) 296-7972.View page
- Shower Valve ReplacementShower scalding when a toilet flushes? We replace shower valves in Denver with pressure balance units, often without removing tile.View page
- Water Softener InstallationHard water scaling your Denver plumbing? We test hardness, size the softener, and plumb the loop and drain to code. Call (720) 296-7972.View page
- Pressure Reducing ValveHigh water pressure in Denver wrecks fixtures. We test static pressure and replace failed PRVs, expansion tank included. Call (720) 296-7972.View page
- Thermal Expansion TankRelief valve dripping after a shower? A closed system needs a thermal expansion tank, sized and pre-charged to your pressure. Denver, CO.View page
- Backflow Preventer TestingCertified backflow testing in Denver for irrigation and commercial assemblies. Repairs, rebuilds, and the report filed for you.View page
Get the new toilet set right the first time
Free quote including flange condition.